Why Does My Shower Go Cold When Another Tap Is Turned On?
You’re enjoying a hot shower when somebody turns on a tap elsewhere in the house and suddenly the water goes cold, loses pressure or changes temperature completely.
It’s a frustrating problem, particularly in a busy household, but why does it happen?
In many cases, the problem comes down to the amount of water available, how your hot water is produced and the demands being placed on your plumbing system at the same time.
Why Does Using Another Tap Affect the Shower?
Your home’s plumbing system has a limited amount of water available at any one time.
When you’re taking a shower, the shower requires a particular flow of hot and cold water to maintain the temperature you’ve selected. If somebody then opens another tap, flushes a toilet or starts another water-using appliance, the available flow can change.
Depending on the type of heating and plumbing system you have, this can result in a noticeable reduction in shower pressure or a sudden change in temperature.
Is It More Common With a Combi Boiler?
It can be.
A combination boiler heats hot water on demand rather than storing a large quantity of hot water ready for use.
Every combi boiler has a limit to the amount of hot water it can produce at a given temperature rise. If several outlets require hot water simultaneously, the boiler and incoming water supply may struggle to satisfy the total demand.
For example, somebody taking a shower while another person runs a hot kitchen tap can result in reduced flow at one or both outlets.
This doesn’t automatically mean that the boiler is faulty. The system may simply be reaching the amount of hot water it can comfortably provide.
Could Low Water Pressure Be the Problem?
Water pressure and flow are related but aren’t the same thing.
A property can appear to have reasonable pressure when only one tap is being used but experience a significant reduction in performance when several outlets are opened simultaneously.
The incoming mains supply, internal pipework, valves and other restrictions can all influence the amount of water available.
If the shower has always behaved this way, the design or capacity of the system could be a factor. If the problem has developed recently, however, it may be worth investigating whether something has changed.
Why Does Flushing the Toilet Affect My Shower?
A toilet cistern requires cold water to refill after it has been flushed.
If this causes a noticeable change to the shower, the additional demand on the cold-water supply may be affecting the balance between the hot and cold water reaching the shower.
Depending on the type of shower and plumbing system, the result could be a change in temperature or flow.
Modern thermostatic shower valves are designed to help regulate temperature when pressures fluctuate, but they still depend on having suitable hot and cold water supplies.
Could the Shower Itself Be Faulty?
Possibly.
If the problem is particularly severe or has only recently started, the shower valve or other components may need attention.
Thermostatic shower cartridges, filters and valves can deteriorate or become affected by debris or limescale over time. This can interfere with the shower’s ability to maintain a consistent temperature.
Before assuming that the boiler or water supply is responsible, it can therefore be worthwhile checking the shower itself.
Can Pipework Affect Shower Performance?
Yes. The size, condition and layout of the pipework can make a considerable difference.
Older properties may have plumbing that has been altered and extended numerous times. Additional bathrooms, en-suites and appliances may have been added without significant changes being made to the original water supply.
Restrictions within pipework or valves can also reduce the available flow.
This is one reason why simply fitting a larger or more powerful shower doesn’t necessarily solve poor shower performance.
What If the Shower Has Always Done It?
If the shower temperature has changed whenever another tap is used for as long as you can remember, there may not be a specific fault.
Instead, the plumbing and hot-water system may simply not be designed to supply multiple outlets at the level of performance you expect.
An assessment of the boiler, incoming water supply and plumbing system can help establish where the limitation lies and what options are available.
What If the Problem Has Suddenly Started?
A sudden change is more likely to justify investigation.
If you previously had a consistently hot shower while other taps were being used but this is no longer the case, something within the system may have changed.
Possible causes can include problems with the shower valve, restrictions in the water supply, boiler performance or another plumbing issue.
Rather than replacing parts unnecessarily, identifying the actual cause should be the first step.
Would a Bigger Boiler Solve the Problem?
Not always.
If a combi boiler cannot provide enough hot water for the demands of the property, its output may form part of the problem. However, fitting a larger boiler won’t necessarily improve matters if the incoming water supply cannot provide sufficient flow.
The hot-water requirements of the household and the available water supply should both be considered when choosing a boiler.
This can be particularly important in homes with multiple bathrooms or where several people regularly use hot water at the same time.
Can the Problem Be Fixed?
In many cases, shower temperature and flow problems can be improved once the cause has been identified.
The solution could be relatively straightforward, such as repairing or replacing a shower component. In other situations, changes to pipework, water supply or the way hot water is provided may need to be considered.
The important thing is to diagnose the problem rather than assuming that poor shower performance automatically means you need a new boiler or shower.
Shower, Boiler and Plumbing Services in Lincolnshire
If your shower loses pressure, suddenly goes cold or changes temperature whenever somebody uses another tap, MJ Services Lincs can help investigate the cause.
With experience across plumbing, bathrooms, boilers, gas and LPG heating systems, we can look at the wider system rather than simply concentrating on the shower itself.
Whether the problem lies with the shower, boiler, water supply or plumbing, identifying the cause is the first step towards finding the appropriate solution.
Contact MJ Services Lincs for help with shower, bathroom and plumbing problems across Lincolnshire.
Get in touch today for more information, call now on 01754 611930
Alternatively you can visit our website: https://www.mjserviceslincs.co.uk/
Please ’Like us on Facebook or ‘Follow’ on twitter for information on offers and product releases.
